X-Git-Url: http://git.ithinksw.org/extjs.git/blobdiff_plain/d41dc04ad17d1d9125fb2cf72db2b4782dbe3a8c..7a654f8d43fdb43d78b63d90528bed6e86b608cc:/docs/output/Ext.Fx.html diff --git a/docs/output/Ext.Fx.html b/docs/output/Ext.Fx.html deleted file mode 100644 index ecd6df75..00000000 --- a/docs/output/Ext.Fx.html +++ /dev/null @@ -1,706 +0,0 @@ -
Package: | Ext |
Defined In: | Fx.js |
Class: | Fx |
Extends: | Object |
A class to provide basic animation and visual effects support. Note: This class is automatically applied -to the Ext.Element interface when included, so all effects calls should be performed via Element. -Conversely, since the effects are not actually defined in Element, Ext.Fx must be included in order for the -Element effects to work.
It is important to note that although the Fx methods and many non-Fx Element methods support "method chaining" in that -they return the Element object itself as the method return value, it is not always possible to mix the two in a single -method chain. The Fx methods use an internal effects queue so that each effect can be properly timed and sequenced. -Non-Fx methods, on the other hand, have no such internal queueing and will always execute immediately. For this reason, -while it may be possible to mix certain Fx and non-Fx method calls in a single chain, it may not always provide the -expected results and should be done with care.
Motion effects support 8-way anchoring, meaning that you can choose one of 8 different anchor points on the Element -that will serve as either the start or end point of the animation. Following are all of the supported anchor positions:
-Value Description ------ ----------------------------- -tl The top left corner -t The center of the top edge -tr The top right corner -l The center of the left edge -r The center of the right edge -bl The bottom left corner -b The center of the bottom edge -br The bottom right corner-Although some Fx methods accept specific custom config parameters, the ones shown in the Config Options section -below are common options that can be passed to any Fx method.
Method | -Defined By | -|
---|---|---|
- |
-
- fadeIn( [Object options ] ) : Ext.Element
-
- Fade an element in (from transparent to opaque). The ending opacity can be specified
-using the "endOpacity" config o...
-
- Fade an element in (from transparent to opaque). The ending opacity can be specified
-using the "endOpacity" config option.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- fadeOut( [Object options ] ) : Ext.Element
-
- Fade an element out (from opaque to transparent). The ending opacity can be specified
-using the "endOpacity" config ...
-
- Fade an element out (from opaque to transparent). The ending opacity can be specified
-using the "endOpacity" config option. Note that IE may require useDisplay:true in order
-to redisplay correctly.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- frame( [String color ], [Number count ], [Object options ] ) : Ext.Element
-
- Shows a ripple of exploding, attenuating borders to draw attention to an Element.
-Usage:
-// default: a single light ...
-
- Shows a ripple of exploding, attenuating borders to draw attention to an Element.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- ghost( [String anchor ], [Object options ] ) : Ext.Element
-
- Slides the element while fading it out of view. An anchor point can be optionally passed to set the
-ending point of...
-
- Slides the element while fading it out of view. An anchor point can be optionally passed to set the
-ending point of the effect.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- hasActiveFx() : Boolean
-
- Returns true if the element has any effects actively running or queued, else returns false.
-
- Returns true if the element has any effects actively running or queued, else returns false.
-
- Parameters:
-
-
|
- Fx | -
- |
-
- hasFxBlock() : Boolean
-
- Returns true if the element is currently blocking so that no other effect can be queued
-until this effect is finished...
-
- Returns true if the element is currently blocking so that no other effect can be queued
-until this effect is finished, else returns false if blocking is not set. This is commonly
-used to ensure that an effect initiated by a user action runs to completion prior to the
-same effect being restarted (e.g., firing only one effect even if the user clicks several times).
-
- Parameters:
-
-
|
- Fx | -
- |
-
- highlight( [String color ], [Object options ] ) : Ext.Element
-
- Highlights the Element by setting a color (applies to the background-color by default, but can be
-changed using the "...
-
- Highlights the Element by setting a color (applies to the background-color by default, but can be
-changed using the "attr" config option) and then fading back to the original color. If no original
-color is available, you should provide the "endColor" config option which will be cleared after the animation.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- pause( Number seconds ) : Ext.Element
-
- Creates a pause before any subsequent queued effects begin. If there are
-no effects queued after the pause it will h...
-
- Creates a pause before any subsequent queued effects begin. If there are
-no effects queued after the pause it will have no effect.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- puff( [Object options ] ) : Ext.Element
-
- Fades the element out while slowly expanding it in all directions. When the effect is completed, the
-element will b...
-
- Fades the element out while slowly expanding it in all directions. When the effect is completed, the
-element will be hidden (visibility = 'hidden') but block elements will still take up space in the document.
-The element must be removed from the DOM using the 'remove' config option if desired.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- scale( Number width , Number height , [Object options ] ) : Ext.Element
-
- Animates the transition of an element's dimensions from a starting height/width
-to an ending height/width.
-Usage:
-//...
-
- Animates the transition of an element's dimensions from a starting height/width
-to an ending height/width.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- sequenceFx() : Ext.Element
-
- Ensures that all effects queued after sequenceFx is called on the element are
-run in sequence. This is the opposite ...
-
- Ensures that all effects queued after sequenceFx is called on the element are
-run in sequence. This is the opposite of syncFx.
-
- Parameters:
-
-
|
- Fx | -
- |
-
- shift( Object options ) : Ext.Element
-
- Animates the transition of any combination of an element's dimensions, xy position and/or opacity.
-Any of these prope...
-
- Animates the transition of any combination of an element's dimensions, xy position and/or opacity.
-Any of these properties not specified in the config object will not be changed. This effect
-requires that at least one new dimension, position or opacity setting must be passed in on
-the config object in order for the function to have any effect.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- slideIn( [String anchor ], [Object options ] ) : Ext.Element
-
- Slides the element into view. An anchor point can be optionally passed to set the point of
-origin for the slide effe...
-
- Slides the element into view. An anchor point can be optionally passed to set the point of
-origin for the slide effect. This function automatically handles wrapping the element with
-a fixed-size container if needed. See the Fx class overview for valid anchor point options.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- slideOut( [String anchor ], [Object options ] ) : Ext.Element
-
- Slides the element out of view. An anchor point can be optionally passed to set the end point
-for the slide effect. ...
-
- Slides the element out of view. An anchor point can be optionally passed to set the end point
-for the slide effect. When the effect is completed, the element will be hidden (visibility =
-'hidden') but block elements will still take up space in the document. The element must be removed
-from the DOM using the 'remove' config option if desired. This function automatically handles
-wrapping the element with a fixed-size container if needed. See the Fx class overview for valid anchor point options.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- stopFx() : Ext.Element
-
- Stops any running effects and clears the element's internal effects queue if it contains
-any additional effects that ...
-
- Stops any running effects and clears the element's internal effects queue if it contains
-any additional effects that haven't started yet.
-
- Parameters:
-
-
|
- Fx | -
- |
-
- switchOff( [Object options ] ) : Ext.Element
-
- Blinks the element as if it was clicked and then collapses on its center (similar to switching off a television).
-Whe...
-
- Blinks the element as if it was clicked and then collapses on its center (similar to switching off a television).
-When the effect is completed, the element will be hidden (visibility = 'hidden') but block elements will still
-take up space in the document. The element must be removed from the DOM using the 'remove' config option if desired.
-Usage:
-
-
- Parameters:
-
-
|
- Fx | -
- |
-
- syncFx() : Ext.Element
-
- Ensures that all effects queued after syncFx is called on the element are
-run concurrently. This is the opposite of ...
-
- Ensures that all effects queued after syncFx is called on the element are
-run concurrently. This is the opposite of sequenceFx.
-
- Parameters:
-
-
|
- Fx | -